|
| |
Floor Oils & Waxes
FURNITURE OIL A solvent free hard wearing and water resistant wood treatment
Biofa Furniture Oil is made using high quality natural ingredients. It is
solvent free, colourless oil which enhances and deepens the natural grain and
tints the wood, giving a breathing, hard wearing and water resistant surface.
The furniture oil is ready to use. Apply thinly with a brush or a lint free
cloth. After 1 hour polish with a soft pad or a lint free cloth. A second coat
after 12 hours will improve the quality of the surface. For kitchen top, we
recommend you use Biofa universal wood oil solvent free 2059. Available in 750ml
and 2.5 litres. Covers approx 35-30 m2 per litre
Natural Paint Ingredients: Lacquer linseed oil, soy oil, walnut
oil, wood oil, castor oil, beeswax, olive oil, carnauba wax, silicic acids,
colophony resin, cobalt, zirconium, manganese and zinc octoate driers, zinc
soap.
UNIVERSAL HARD OIL Our bestseller floor product acclaimed by professionals As
an alternative to the Hard Varnish, it enhances the natural grain, emphasising
the colour and giving an open-pored, silky matt finish that is hard wearing and
water resistant. It can be used on wood and cork floors. Two coats are
recommended after the Universal Priming Oil is applied. . Available in 750ml,
2.5 litres, 10 litres and 30 litres. Covers approx 10-15 m2 per litre.
Natural Paint Ingredients: aliphatic hydrocarbon (plant based
vinegar), colophony resin, micro-crystalline wax, clay, soy lecithin, caster
oil, cobalt-zirconium, zinc and manganese octoate dryers, silicic acids, citrus
peel oil, safflower oil.
UNIVERSAL WOOD OIL As an alternative to the Hard Varnish, hard wax oil or
hard oil, the Universal wood Oil is solvent free Oil-wax mixture, which improves
wood permanently and guarantees a hard-wearing surface. It only requires a
single coat. It enhances the natural grain, emphasising the colour and giving an
open-pored, silky soft sheen finish that is hard wearing and water resistant. It
can be used on wood and cork floors. One coat is recommended on bear wood. Apply
evenly with a short-haired roller. After one hour, spread out remaining
universal wood Oil (shiny patches) with a squeegee and allow the oil tobe
absorbed. When the entire surface is saturated (even sheen across the entire
floor), remove all remaining oil with a squeegee. Work in with a disc machine
and a green pad. Dry and polish with a new green pad. If the surface is not
quite even, polish with a white pad. (Note that not using a machine would result
of the oil not drying and the wood being sticky.) Available in 750ml and 2.5
litres. Covers approx 20 to 30 m2 per litre
Natural Paint Ingredients: Linseed oil, wood oil, colophony resin
ester, zinc oxide, micro wax, cobalt-, zirconium- and manganese-octoate driers.
UNIVERSAL HARD WAX An ideal solvent free, colourless wax, for stone, floor,
clear wood… It is a solvent free, colourless, silky matt hard wax. it penetrates
well, is water repellent, breathable, anti static, pleasant-smelling and heat
resistant to 100 degrees. Suitable for all timber and cork floors. With a putty
knife, remove a nugget of wax and polish with a white pad. Spread the wax evenly
and repeat if necessary. It allows the wood to breathe and is dirt and water
repellent. Available in 200ml and 1 litre. On un-primed wood, one litre covers
8-10 m2.
Natural Paint Ingredients: Candellila wax, beeswax, carnauba wax,
paraffin wax, colophony resin, linseed oil, cobalt, zirconium, manganese and
calcium-octoate drier.
COLOUR OILS Coloured, solvent free oil made from natural raw materials.
Strong, breathing and anti-static, sweat saliva proof. This product is available
in 11 different colours. Coloured, solvent free oil made from natural raw
materials. Strong, breathing and anti-static, sweat saliva proof. This product
is available in 11 different colours. Apply very thinly and evenly. Any
remaining COLOUR OIL must be taken off with a cloth after 30 minutes; otherwise,
it will cause a sticky, uneven surface. The COLOUR OIL has to be considered as
priming oil. Two coats of UNIVERSAL HARD OIL have to be applied on top. Apply
very thinly and evenly. Any remaining COLOUR OIL must be taken off with a cloth
after 30 minutes; otherwise, it will cause a sticky, uneven surface. The COLOUR
OIL has to be considered as priming oil. Two coats of UNIVERSAL HARD OIL have to
be applied on top.
Natural Paint Ingredients: Linseed oil, castor oil, colophony
resin, clay, zinc oxide, micro-crystalline wax, various pigments according to
colour, cobalt and zirconium-octoate driers.
Back to
Biofa Page
|
Drinks,
Natural Cleaning Products,
Therapy and much, much more.
SPECIAL OFFER PAGE
